MAMBA STACK F722 DJI MINI – F35

Mamba 20×20 Mini stack with F7 processor and a DJI connector input for easy installation.

Note: As the STM32F722 will heat up quickly, it is recommended to leave at least 5mm interspace on both FC side with nothing covering it for good air circulation.

This stack can be used with M2/M3 mounting holes (adaptor included)

FC Specifications:

• MCU: 216MHz STM32F722RET6 32BIT
• IMU: MPU6000
• Baro: No
• OSD: BF OSD
• Uarts: 6Set
• ESC Soft: Dshot300/600/
• LED: Blue&Orange for FC Status,,White 5V,Red 3.3V
• WS2812 LED Control: BF LED Control
• Smartaudio: Yes
• RSSI: Yes
• Buzz: Yes
• Input: 2~6S Lipo (8.4~25V)
• VTS Protection: Yes
• UARTS:6 Ports
• DJI PORT SUPPORT
• BEC: 5V 2A&9V 1.5A
• FC Firmware: BetaFlight
• Target: MAMBA F722
• Mounting: 20×20mm,Φ2
• Dimensions: 30×36.5×13.5mm
• Weight: 3.9g

Mamba F35 35A ESC:

• Item name:  Mamba F35HV ESC
• Input voltage:  3-6S LIPO (12.5- 25V)
• Burst Curr  :200A
• MAX: 45A(8S)
• BEC:  NO
• Mounting Size: 20×20mm,⌀ 2
• Mounting Hole: M2
• Weight: 7g

Package:

• 1 x Mamba F722 Mini DJI Betaflight Flight Controller
• 1 x Mamba F35 35A 6SHV ESC