TuneRC v2 Poly F405 2S-4S-20a AIO – 25.5×25.5
Poly AIO V1.2 is Here. The OG Poly F405 AIO is Getting Better.
Several improvements are made to the V1.2 to make the Poly AIO easier to solder and work with, and to meet pilots needs. Detailed improvements are as below.
Bigger and easier to access battery lead and capacitor soldering pads.
Bigger flash blackbox. The blackbox flash is updated from 4Mbyte to 8M flash. Pilots can now record more flying data, which makes the tuning easier.
New inverter is used. Now, you don’t need to bridge the jumper pads any more. Just wire the SBUS receiver to the UART4, and you are good to go.
Higher current 3.3V LDO is featured onboard, the power supply is much improved.
Note about the ESC firmware Preflashed to the Poly F405 V1.2
The default Bluejay firmware on the Poly F405 V1.2 is 0.21. The start up power is lower than the previous version V0.16. If you find your motor doesn’t spin up, please try to increase the start up power.
Check out the article below to see how to set up the startup power and motor idle.
https://github.com/bird-sanctuary/bluejay/wiki/Setup
——updated on 2024/8/27
poly f405 v1.2 image
Suitable for Lightweight Toothpick and Cinewhoop
The Poly AIO V1.2 is easy to use, light weight and versatile. Big soldering pads, reasonable pad layout and easy to access battery leads, all of these features make the Poly F405 V1.2 AIO really easy to solder and work with. It also features a bigger blackbox 8M flash, now you can record more flying data. And 5UARTs onboard mean you will not be short of UART anymore. So whether you build toothpick, cinewhoops or longrange quads, Poly F405 2S-4S V1.2 AIO get you all covered.
Recommended Builds
The Poly V1.2 AIO is suitable for light 3″ sub250g builds. It supports motors ranging from 1102~1104, 1202~1204, 1303, to 1404 motors. 1404 is the largest motor the Poly V1.2 supports, please avoid using high kv option like 6000kv 1404 motors. And for 1404 4s build, we highly recommend you solder the capacitor directly to the capacitor soldering pads.
